Full Tilt SL - 07-13 Silv/Sierra 1500/07-14 HD 8'

Extang FullTilt Truck Bed Covers


Additional Detail: Style: Roll-Up Soft Cover

*This Product Has Been Discontinued


Your Selected Product Fits These Vehicles

  • 2007-2009 Chevrolet Silverado 1500 97.6 Bed
  • 2010-2013 Chevrolet Silverado 1500 97.8 Bed
  • 2007-2014 Chevrolet Silverado 2500 HD 97.6 Bed
  • 2007-2010 Chevrolet Silverado 3500 HD 97.6 Bed
  • 2014 Chevrolet Silverado 3500 HD 97.6 Bed
  • 2011-2013 Chevrolet Silverado 3500 HD 97.8 Bed
  • 2007-2009 GMC Sierra 1500 97.6 Bed
  • 2010-2013 GMC Sierra 1500 97.8 Bed
  • 2007-2014 GMC Sierra 2500 HD 97.6 Bed
  • 2007-2014 GMC Sierra 3500 HD 97.6 Bed


This hinged tonneau is as easy to use as it is heavy duty. Designed to be able to be removed by one person, without tools in just moments.

The FullTilt can be rolled up to the cab for carrying large cargo or can be completely removed. The gas shocks are designed for easy removal, by hand, using a ball joint snap release. No tools required! Then you simply lift the tonneau at the hinge, lift up and it will disconnect allowing you to move the light cover off of the truck.

  • Hinged at cab rail for FullTilt action. Gull-wing latches secure tonneau without restricting cargo space
  • Perfectly sewn, tight fitting tarp with anti-curl corners allows for extremely good looks in all weather conditions
  • Gas shocks are designed to be easily removed by hand using a ball and joint snap release. No tools needed
  • Quick release hinge design allows entire tonneau to be instantly lifted and removed from frame with no tools
  • TuffKlamps offer two bow height positions. HIGH for performance, LOW for cold weather climates


Please feel free to make use of the Extang FullTili Tonneau Cover installation instructions below to assist you with the installation. Upon purchase you’ll receive vehicle specific instructions. However, if you have further questions or need technical assistance, please call one of our knowledgeable installation experts at 800-877-2588.


The Extang FullTilt Snap carries a lifetime warranty against defective materials or workmanship on all truck bed cover rails, aluminum components, clamps, bows, hardware. And a 10-year warranty against defective materials or workmanship on the vinyl covering.


How easy is it to take the Full Tilt cover off?
The cover can either be unsnapped and rolled to the cab, or the entire cover with side, cab and tail rail can be removed as one piece.

Will the full Tilt work with a drop-in bed liner that goes over the bed rails?
This tonneau will work as long as the bed liner is an under-the-rail bed liner.

I live in a region that gets a lot of snow. Can the Full Tilt hold the snow without bending or stretching?
Yes, however we recommend that you remove the snow from your tonneau just as often as you remove the snow from your windshield.

I live in a region that is very hot. Will the Full Tilt fabric fade in the sun?
No, however it is recommended that you apply Tonno Tonic to the vinyl fabric.

How do I adjust the tension on my Full Tilt tonneau cover?
The sliding rail snaps can be reversed for either the tighter or looser position. Or, you can adjust the bow positions to the higher clamp position (to tighten the tarp) or the bottom clamp position (to loosen the tarp).

How far above or below the rail does the Full Tilt sit?
It sits 1 inch above the rail.

What is the warranty?
10 years on the vinyl cover and lifetime on the frame/components.

There are currently no reviews for this product