The all-new Pro X15 includes many of the same great features as our #1 selling cover, the Lo Pro, but with added style and performance. New 15 degree rails deliver an Xtra-low profile, flush-mount look on the truck bed, and superior-grade woven fabric provides a stylish matte-black appearance.
The cover can be installed or removed in minutes, with no drilling required, and the unique self-leveling design feature allows for a more accurate installation. The Pro X15 is made in the USA and comes backed with a Lifetime Warranty.
Please feel free to make use of the TruXedo Pro X15 Truck Bed Cover installation instructions below to assist you with the installation of your TruXedo Pro X15 Truck Bed Cover. You will find printed installation instructions to help guide you through the simple process.
TruXedo, Inc. warrants that all new products are free from defects in material and workmanship. This warranty is effective if the product is properly installed and used for the purpose intended and applies to the original buyer only. TruXedo, Inc.’s obligation under this warranty is limited to the repair, or at its option, replacement of any part returned, transportation prepaid, to TruXedo, Inc., Yankton, SD, if the product is, in our judgment, defective.
How do I care for the fabric of my Pro X15 truck bed cover?
The woven fabric on your truck bed cover can be cleaned with mild soap, water, and soft fine bristle brush. The cover may be hand washed or safely cleaned in the carwash of your choice.
How do I adjust the tension on my truck bed cover?
The Pro X15 truck bed cover has rear mounted automatic tension control. There are two spring loaded steel plungers at the rear of the bed that maintain constant tension, allowing the cover to stay tight in any weather. Initially, you need to set the tension. This should be done during the warmest, sunniest part of the day by closing the cover, releasing the hook and loop fasteners from both sides near the cab, and checking compression of the spring plungers against the rear header. Roll cover open to make adjustments. Repeat until satisfactory tension is achieved, refer to step 15 of the Pro X15 owner’s manual for more specific information.
I have a toolbox on my truck already. Can I still get a Pro X15 to fit on my truck?
Currently, the Pro X15 truck bed cover cannot be made to fit with an existing toolbox. However, the Lo Pro can be custom built to fit with your toolbox, please see Custom Covers located under the Products tab.
Can I lock the Pro X15?
The TruXedo® Pro X15 secures automatically when latched at the rear, and provides added security when used with a locking tailgate. It cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.
Will the TruXedo® Pro X15 work with a 5th wheel?
Yes! Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.
I live in a region that is very hot. Will the TruXedo® Pro X15 fabric fade in the sun?
The fabric used in the TruXedo® Pro X15 is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.
Why is my cover holding water after the rain?
Water pooling on a fabric cover is normal. Our cross tubes are not arched, the covers are designed to sit flat, so some water will sit on the vinyl. Once you drive your truck, the water will move off the cover and return to its original shape. Make sure to re-tighten the hook and loop fasteners along the length of the bed.
Where do I find the Serial Number on my Pro X15?
Roll the cover to the cab of the truck, the serial number can be found on a silver sticker attached to the front aluminum bar, on the driver side.
Will I be able to open my Honda Ridgeline trunk if I have a TruXedo Pro X15 tonneau cover?
Yes. Your trunk is fully functional and will open approximately 85% of the way.
X15 rails provide a distinctive flush mount look, and include a unique self-leveling design feature allowing for a faster, more accurate installation.
Extremely durable, superior-grade woven fabric provides a stylish matte-black appearance. Inherent dirt resistant characteristics of the fabric help it stay cleaner for longer.
The anodized trigger latch requires only one finger to open the cover. Roll the cover closed with ease to securely store and secure your cargo.
There are currently no reviews for this product