TruXedo Sentry CT

(202)
Starting at $899.00

Description

Introducing the all-new Sentry CT by TruXedo. This hard roll-up truck bed cover comes equipped with our premium matte black woven fabric and features an Xtra-low profile look. The fabric is pressure bonded to heavy-duty black aluminum slats making Sentry CT the ultimate in strength and style.

When rolled up tightly at the cab, the cover provides full bed access without blocking rear view visibility or the third brake light. When closed, the Sentry CT’s flush mount profile delivers a sleek look that is sure to impress! An extra security latch is located towards the center of the cover for enhanced protection so you can rest in the fact that your cargo is safe and sound.

Installation is quick and easy and does not require the use of special tools or drilling. The Sentry CT is made in the USA and comes backed by a 3-year warranty.

  • Premium Matte Black Woven Fabric - This high-end material delivers a remarkable and stylish matte black finish that has dirt resistant characteristics to help it stay clean for longer.
  • Xtra-Low Profile - X15 rails are incorporated into the design providing a distinctive flush mount look while enhancing the overall look of your truck.
  • Strong & Resilient - Heavy-duty matte black aluminum slats are pressure bonded to the fabric for additional strength and resiliency.
  • Easy to Use - The Slam latches near the tailgate allow you to open the cover from either side of the truck. An additional security latch, located towards the center of the truck bed, enhances the security of this cover.
  • Quick Release System - The entire cover can be removed in seconds, without tools, providing true 100% full bed access.

Installation

Please feel free to make use of the TruXedo Sentry CT Truck Bed Cover installation instructions below to assist you with the installation of your TruXedo Sentry CT Truck Bed Cover. You will find printed installation instructions to help guide you through the simple process.

Warranty

TruXedo, Inc. warrants that all new products are free from defects in material and workmanship. This warranty is effective if the product is properly installed and used for the purpose intended and applies to the original buyer only. TruXedo, Inc.’s obligation under this warranty is limited to the repair, or at its option, replacement of any part returned, transportation prepaid, to TruXedo, Inc., Yankton, SD, if the product is, in our judgment, defective.

FAQs

How do I care for the fabric on my Sentry CT cover?
The woven fabric on your truck bed cover can be cleaned with mild soap, water, and soft fine bristle brush. The cover may be hand washed or safely cleaned in the carwash of your choice.

I have a toolbox on my truck already. Can I still get the Sentry CT to fit on my truck?
No. The Sentry CT tonneau cover cannot be custom made to fit with an existing toolbox.

Will the TruXedo® Sentry CT work with a 5th wheel?
Yes. Simply roll the cover all the way open and secure with security straps at the front of the bed. This allows you full access to your 5th wheel.

Can I lock the Sentry CT?
The Sentry CT secures automatically when latched at the rear, with an additional security latch in the middle to provide added security. When used with a locking tailgate it cannot be opened until the tailgate is unlocked and opened. There are no additional locks or sliding mechanisms needed to lock the cover.

I live in a region that is very hot. Will the Sentry CT fabric fade in the sun?
No. The fabric used in the Sentry CT is very high quality and has been tested in extreme conditions. It is UV-protected and will not fade in the sun.

Can I still open my tailgate with the Sentry CT on my truck?
Yes. The Sentry CT does not restrict the tailgate. The rear header functions independently of the tailgate so there is nothing to remove when opening the tailgate.

Does the Sentry CT come in different colors?
No. The Sentry CT fabric is available in black only.

Will the Sentry CT work in the winter as well as in the summer?
Yes. The Sentry CT fabric is designed to work in temperatures ranging from –40 degrees to 120 degrees Fahrenheit. There are no cumbersome snaps or zip-strips to hassle with – no more tugging on the fabric to get it snapped. Just roll it back and latch into place. Then slide your hand along the sides to engage the Velcro® brand fasteners on the sides.

Will the Sentry CT work with my other truck accessories?
The Sentry CT will work with most truck accessories such as bed liners, rail caps and side rails. It may not work with all bed extenders but there is an adapter kit available for purchase. The Sentry CT side rails extend 3” into the bed on each side. In order to use the bed extender, it must not come within 3” of the side of the bed when rotated, or it must be able to detach from the truck, be manually rotated and re-attached. Please call 1-877-878-9336 or email sales@truxedo.com if you have questions about a specific application or accessory.

I have an older truck and I don’t see the year in the application guide. Can I still get a Sentry CT for my truck?
No. The Sentry CT can not be custom made for applications that are not listed.

I have a truck with a utility track system in the bed. Can I still use the Sentry CT?
Yes, the Sentry CT will work with your utility track system.

I live in a region that gets a lot of heavy snow. Can the Sentry CT hold the snow without bending?
The Sentry CT uses light but strong aluminum slats under the vinyl exterior. It is very high quality and has been tested in extreme conditions. It can hold up to 400 pounds without bending the cover.

Where can I order replacement parts for my Sentry CT?
Only replacement part orders can go directly through TruXedo by calling 1-877-878-9336 or filling out the Contact Us form.

Where do I find the Serial Number on my Sentry CT?
Roll the cover to the cab of the truck, the serial number can be found on a silver sticker attached to the front aluminum slat, on the driver side.

XTRA-LOW PROFILE

The X15 rails are incorporated into the design providing a distinctive flush mount look while enhancing the overall look of your truck.

DURABILITY & SECURITY

The vinyl fabric is pressure bonded to heavy-duty matte black aluminum slats for increased durability and security.

EASY TO USE

The slam latches at the tailgate allow you to open the cover from either side of the truck. An additional security latch, located towards the center of the truck bed, enhances the security of this cover.

Reviews

202 Total
RICHARD I.
2019 Toyota Tundra
5 / 5
24 July 2020
It installed so easy, I thought I did something incorrectly. This is one of the best engineered aftermarket products I’ve installed on a truck.
Joe C.
2017 Ford F-150
5 / 5
17 July 2020
I don't have any complaints. This cover is built like a tank and it stayed completely dry through our roadtrip through pounding Florida and Georgia rains. And it looks great! What more could you want?
Ronald H.
2020 Ford F-150
5 / 5
9 July 2020
Great product, increased mileage. I am at least getting one mile per gal. better mileage. Truck gets about 20 mpg, so that's about a 5% improvement. I am very impressed with the quality and function of my , Truxedo Sentry CT.
Brian T.
2020 Chevrolet Silverado 1500
5 / 5
24 June 2020
Easy install. Looks awesome!!
Darcy R.
2015 Ram 1500
5 / 5
17 June 2020
Love the cover
Michael C.
2019 Ram 2500
5 / 5
4 May 2020
Incredibly easy install in less than 20 minutes. Looks great and super easy to use. Best functional bed cover I've had. Great Product
Anthony G.
2020 Chevrolet Silverado 1500
5 / 5
30 April 2020
Love the how flush it sits on the bed. Quality of the cover is top notch and does not feel cheap at all. I feel rails could have been just a little thicker for the weight of the cover when rolled up.
KYLER H.
2020 Toyota Tundra
5 / 5
18 April 2020
great product. I wish it sealed on the corners of the tailgate to prevent water from coming in.
Mike F.
2020 Ford F-150
5 / 5
16 April 2020
Suggest installers write the serial #s down before installation is complete. Had to crawl into back and lay on my back to get.
Sam D.
2020 Ram 1500
5 / 5
30 March 2020
Very nice cover super easy install only feedback I would give would be to deburr the aluminum mounting brackets the edges were very sharp
LOAD MORE